Do you want to give your car a new look without spending thousands of dollars? Check out these spray paints that we have listed for you.
Dupli-Color DE1652 Ceramic Chrysler Hemi Orange Engine Paint - 12 oz.
Duplicolor engine enamels contain ceramic resins for maximum heat dissipation and gloss retention. A durable formula that resists temperatures up to 500 degrees Fahrenheit intermittently. Dupli Color engine enamel will not chip, flake, crack or peel when exposed to excess heat or automotive fluids.
the paint was as I expected , good quality
Custom built a fireplace screen and this high temp paint was used to prevent oxidization on polished steel. very nice.
It looks exactly as it should. As long as surfaces are prepped well this comes out the exact GM color.
I've had this tool before, but after 25 years of misuse it needed a vacation. The new one is a welcome tool.
james e mcknight sr.
Its the only paint that exactly matches the engines of the early 70's era.
Trusted brand, covered as expected. Good product
Thanks. This paint worked out great. Tried finding it local and no one carries it. Well worth the money.
USC SprayMax 2K Glamour High Gloss Aerosol Clear
? Spray Max 2K Glamour High Gloss Aerosol Clear. A 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish ? 2K clearcoat in an easy to use aerosol ? Activate, shake and spray ? Unique nozzle delivers spray gun results ? Dries to a high gloss finish ? Excellent weather and chemical resistance ? Color: Clear liquid (as packaged) ? Mix: Ready to spray. Activate, shake and spray ? Substrate: Properly applied basecoats ? Suggested Use: For use over all basecoats.
The best from rattle can. If u wanted better you would be using a spray gun
Good shipping exactly what I needed and great price appreciate it
I've purchased about half a dozen cans of this stuff. Undoubtedly the best rattle can clearcoat out there, and it's pretty damn close to an auto body clearcoat job. I've used it on the front as rear bumpers on my truck, and also used it on the tank and fenders on my motorcycle with great results. so I can say with confidence it's works on metal as good as it works on plastic.One word of advice, prepping is key, make sure you follow the directions and the temp/humidity is ideal. This stuff also wet sands and polishes well, but make sure you have enough coats down to do it.
It worked out great. Some areas came on cloudy, opaque at first but when I used a heat gun to dry it between coats is came out super clear. Wayyyyyy better then duplicolor crap I bought that pealed. This stuff is wayyyyy better
Just great product
IÃ¢Â?Â?ve use different brands of spray clear coat, IÃ¢Â?Â?m not a professional painter just a DIY guy that likes to work on my cars, and this is the best clear coat that I ever used, you can get really good results as if you used a HVLP spray gun but of course with less work and less time, prep is important a ventilated area as well as protection, this stuff is really heavy and you MUST wear eyes protection and of curse your respirator also wear long sleeves while using this product, this is the second time IÃ¢Â?Â?ve used and I love the way my project came out! Make sure your first coat is light and the following coat medium and last coat heavy, you might want to do 4 coats for a better result, temperature and humidity is really important, some orange peal but most of the factory paint came with orange peal so not a big deal.
I used it after polishing my oxidized headlight lenses. Made a clear glossy finish. Highly recommended but follow the directions and use outside if possible, especially if you don't have a mask, the fumes are somewhat dangerous.
if you are looking for a great finish to a spray paint-paint job, this stuff is ten times better than using the off the shelf stuff. Although the cost is significantly higher than the single stage stuff from the hardware store, the finish is so much better. i learned the hard way after repeatedly having to redo the finish by going cheap.
SEM Products 15303 Graphite Color Coat - 12 fl. oz.
Features and Benefits: Excellent for vinyl, plastic, carpet and velour Elastomeric coating - will not crack Superior adhesion, flexibility and hiding Ready to spray Quick drying Color Coat is formulated to match, restore or change color on most vinyl surfaces, flexible and rigid plastics, carpet and velour. Color Coat is fade resistant, flexible and is a permanent coating.
VHT (SP739-6 PK Satin Black High Temperature Brake Caliper Paint - 11 oz. Aerosol, (Case of 6)
VHT Brake Caliper, Drum and Rotor Coatings have been specifically designed for the custom detailing of brake components. It is heat resistant to 900 degrees Fahrenheit (482 degrees Celsius) and will not chip, crack, fade or rust even under extremes of operation or road and weather conditions. It is easy to apply, dries quickly and is remarkably resistant. Careful preparation is essential.
I was fearful that painting my calipers with spray paint would look really tacky so I tried it on my oldest car and it actually turned out looking great.
Cleaning, sanding, this product, and some clear.. You've got yourself a work of art!!
Worked great on my brake calipers!
This is one of the easiest spray paints you will ever use effortless application.
Easy to paint and dried the same color
great product and price